Guides - Ventev https://ventevinfra.com/resources/guides/feed/ Power, Protect, & Connect A Wireless Network Mon, 27 Nov 2023 23:07:21 +0000 en-US hourly 1 https://wordpress.org/?v=6.4.3 https://ventevinfra.com/wp-content/uploads/apple-icon-50x50.png Guides - Ventev https://ventevinfra.com/resources/guides/feed/ 32 32 RF Surge Arrestor Installation Instructions https://ventevinfra.com/resources/rf-surge-arrestor-installation-instructions/ Mon, 27 Nov 2023 23:03:22 +0000 https://ventevinfra.com/?post_type=resources&p=15180 The post RF Surge Arrestor Installation Instructions appeared first on Ventev.

]]> The post RF Surge Arrestor Installation Instructions appeared first on Ventev.

]]> Ventev Infrastructure for DART Deployment Scenarios https://ventevinfra.com/resources/ventev-infrastructure-for-dart-deployment-scenarios/ Tue, 05 Jan 2021 20:54:58 +0000 https://ventevinfra.com/?post_type=resources&p=8242 A guide to Ventev wireless infrastructure products for various Cisco DART Access Point deployments.

The post Ventev Infrastructure for DART Deployment Scenarios appeared first on Ventev.

]]> A guide to Ventev wireless infrastructure products for various Cisco DART Access Point deployments.

The post Ventev Infrastructure for DART Deployment Scenarios appeared first on Ventev.

]]> Painting Guidelines for Polycarbonate Enclosures and Antenna Radomes https://ventevinfra.com/resources/painting-guidelines-for-polycarbonate-enclosures-and-antenna-radomes/ Wed, 30 Sep 2020 19:13:50 +0000 http://ventevinfra.com/?post_type=resources&p=7657 Ventev recommends a BASF polymer or equivalent non-metallic paint for our polycarbonate line of enclosures and on antenna radomes. This material has the properties needed for long term protection while not impacting the RF performance of radiating devices including antenna and/or radio/AP inside the enclosure. The material is paintable if the procedure below is followed.

The post Painting Guidelines for Polycarbonate Enclosures and Antenna Radomes appeared first on Ventev.

]]> Ventev recommends a BASF polymer or equivalent non-metallic paint for our polycarbonate line of enclosures and on antenna radomes. This material has the properties needed for long term protection while not impacting the RF performance of radiating devices including antenna and/or radio/AP inside the enclosure. The material is paintable if the procedure below is followed.

The post Painting Guidelines for Polycarbonate Enclosures and Antenna Radomes appeared first on Ventev.

]]> Troubleshooting Guide for the KM3-ES-2450-AC NEMA 4X Enclosure System for Rajant https://ventevinfra.com/resources/7314/ Mon, 17 Aug 2020 12:34:46 +0000 http://ventevinfra.com/?post_type=resources&p=7314 This guide is to provide basic troubleshooting for the Rajant KM3-ES-2450-AC NEMA 4X enclosure system, SKU 236606. The guide assumes that the enclosure system has been installed in accordance with the local jurisdiction’s regulations for hazardous environments. Please note that some steps have the potential to create electrical sparks or arcing if not performed properly. […]

The post Troubleshooting Guide for the KM3-ES-2450-AC NEMA 4X Enclosure System for Rajant appeared first on Ventev.

]]> This guide is to provide basic troubleshooting for the Rajant KM3-ES-2450-AC NEMA 4X enclosure system, SKU 236606. The guide assumes that the enclosure system has been installed in accordance with the local jurisdiction’s regulations for hazardous environments. Please note that some steps have the potential to create electrical sparks or arcing if not performed properly. Only personnel certified and/or trained in the local jurisdiction’s regulations for hazardous environments should perform the operations outline in this guide.

The post Troubleshooting Guide for the KM3-ES-2450-AC NEMA 4X Enclosure System for Rajant appeared first on Ventev.

]]> Enclosure Mounting Feet Installation Guide https://ventevinfra.com/resources/enclosure-mounting-feet-installation-guide/ Tue, 04 Aug 2020 20:53:04 +0000 http://ventevinfra.com/?post_type=resources&p=7213 Ventev’s enclosures are intended for indoor OR outdoor use and are commonly used in harsh environments. These enclosures protect WLAN equipment from damage caused by inclement weather and tampering. Proper mounting of the enclosure is essential in ensuring safety and reliability of your network. This is a simple step by step installation guide utilizing mounting […]

The post Enclosure Mounting Feet Installation Guide appeared first on Ventev.

]]> Ventev’s enclosures are intended for indoor OR outdoor use and are commonly used in harsh environments. These enclosures protect WLAN equipment from damage caused by inclement weather and tampering. Proper mounting of the enclosure is essential in ensuring safety and reliability of your network. This is a simple step by step installation guide utilizing mounting feet and a polycarbonate enclosure.

The post Enclosure Mounting Feet Installation Guide appeared first on Ventev.

]]> Troubleshooting Guide for the ES1-IS-2450 NEMA 4X Enclosure System for Rajant https://ventevinfra.com/resources/troubleshooting-guide-for-the-es1-is-2450-nema-4x-enclosure-system-for-rajant/ Tue, 21 Jul 2020 13:39:54 +0000 http://ventevinfra.com/?post_type=resources&p=7190 This guide provides troubleshooting for the ES1-IS-2450 NEMA4x enclosure system for Rajant, SKU #283384. The guide assumes that the enclosure system has been installed in accordance with the local jurisdiction’s regulations for ECP ATEX/IEC Ex explosion-proof enclosures and environments. Please note that some steps have the potential to create electrical sparks or arcing if not […]

The post Troubleshooting Guide for the ES1-IS-2450 NEMA 4X Enclosure System for Rajant appeared first on Ventev.

]]> This guide provides troubleshooting for the ES1-IS-2450 NEMA4x enclosure system for Rajant, SKU #283384. The guide assumes that the enclosure system has been installed in accordance with the local jurisdiction’s regulations for ECP ATEX/IEC Ex explosion-proof enclosures and environments. Please note that some steps have the potential to create electrical sparks or arcing if not performed properly. Only personnel certified and/or trained in the local jurisdiction’s regulations for ECP ATEX/IEC Ex explosion proof enclosures and environments should perform the operations outline in this guide.

The post Troubleshooting Guide for the ES1-IS-2450 NEMA 4X Enclosure System for Rajant appeared first on Ventev.

]]> Troubleshooting Guide for Rajant KM3-ES-2450 Enclosure System https://ventevinfra.com/resources/troubleshooting-guide-for-rajant-km3-es-2450-enclosure-system/ Fri, 10 Jul 2020 12:36:42 +0000 http://ventevinfra.com/?post_type=resources&p=7180 This guide provides troubleshooting for the KM3-ES-2450 NEMA4x enclosure system, SKU #226396. The guide assumes that the enclosure system has been installed in accordance with the local jurisdiction’s regulations for hazardous environments. Please note that some steps have the potential to create electrical sparks or arcing if not performed properly. Only personnel certified and/or trained […]

The post Troubleshooting Guide for Rajant KM3-ES-2450 Enclosure System appeared first on Ventev.

]]> This guide provides troubleshooting for the KM3-ES-2450 NEMA4x enclosure system, SKU #226396. The guide assumes that the enclosure system has been installed in accordance with the local jurisdiction’s regulations for hazardous environments. Please note that some steps have the potential to create electrical sparks or arcing if not performed properly. Only personnel certified and/or trained in the local jurisdiction’s regulations for hazardous environments should perform the operations outline in this guide.

Equipment Required for Troubleshooting
• Digital multimeter with probes
• CAT6 Ethernet cable
• Laptop
• Rajant BC Commander software

The post Troubleshooting Guide for Rajant KM3-ES-2450 Enclosure System appeared first on Ventev.

]]> Hanging Conduit Assembly Instructions https://ventevinfra.com/resources/hanging-conduit-assembly-instructions/ Mon, 29 Jun 2020 18:29:25 +0000 http://ventevinfra.com/?post_type=resources&p=6903 The post Hanging Conduit Assembly Instructions appeared first on Ventev.

]]> The post Hanging Conduit Assembly Instructions appeared first on Ventev.

]]> Chemical Resistance- Polycarbonate https://ventevinfra.com/resources/chemical-resistance-polycarbonate/ Wed, 13 May 2020 13:47:38 +0000 http://ventevinfra.com/?post_type=resources&p=6697 The post Chemical Resistance- Polycarbonate appeared first on Ventev.

]]> The post Chemical Resistance- Polycarbonate appeared first on Ventev.

]]> Venvolt 802.3 battery LVD reset – 04152019 https://ventevinfra.com/resources/venvolt-802-3-battery-lvd-reset-04152019/ Thu, 30 Apr 2020 20:06:05 +0000 http://ventevinfra.com/?post_type=resources&p=6622 The post Venvolt 802.3 battery LVD reset – 04152019 appeared first on Ventev.

]]> The post Venvolt 802.3 battery LVD reset – 04152019 appeared first on Ventev.

]]>